Error code 0x80040116

When trying to click 'Settings' on a PST file in Outlook 2007 (File > Data File Management) I kept getting an error code 0x80040116.

I get an error code 0x80040116 when trying to click on Outlook PST file setting option. I had problem with both main folders PST as well as Archive PST file i.e. for removing archive folder issue I just click right on Archive folder and select close archive folder. After that go to file > data file management and click ‘Add’ to add Archive .pst file. You can use this processor for other PST files too. But not for main personal folder Outlook.pst files because it don’t close during an error 0x80040116.

For Personal folder PST file you have to follow the following procedure.

• Click on file > Data file management then Click on Open folder where Outlook data files are stored. Keep Explorer window open.
• Exit from Outlook
• On opened Explorer window you seen an Outlook.pst file it a main personal folder PST file
• Now copy and paste this Outlook.pst file to other folder and be sure that you have a backup. The process take a long time if you a large PST so be patience
• Now Open Outlook PST files and deletes all the folders lies under a Personal Folders.
• Now empty deleted items by clicking Tools and then Empty Deleted Items folders
• Next open copy Outlook.pst file by going File > Data file management and then Click add.
• Outlook will now open a Personal folder which would have all emails and other stuff as you had in the personal folders.
• Now just drag and drop emails back into mail personal folder
• Once this dragging and dropping process get completed click on the right and Close personal folder
• You can now go to File > Data File Management and click 'Settings' on your Personal Folders and see the Settings dialog.

During Processing all this procedure is careful as it can harm your Outlook database. I am assuming that you don’t connect with an MS Exchange from your Outlook. If you do then mentioned procedure does not work for you.

And If the above procedure doesn't work for you then Try an third party utility as it helps in resolving all error issues of Outlook and get back your Outlook PST file in a healthy file format. for more detail follow link: http://www.outlookpstrecovery.org/

Outlook Error 0x8004010F

Unable to access Outlook data and getting an Error 0x8004010F

If you searched before about this error in forum or somewhere else you found that they suggest to create a new profile. But it was not a good idea if you have different email account in Microsoft Outlook. At this time given below steps work for you

• Step1: From Outlook 2010 click File > Account Setting
• Step2: Next Click on Change Folder
• Step3: After that Click on new Outlook data file (temporary)
• Step4: Give it whatever name you want (I used Test)
• Step5: Click + to left of the folder name to expand subfolders.
• Step6: And after that Click Inbox and OK
• Step7: Then Click change folder
• Step8: Click select one you want
• Step9: Close account setting and Click send/receive.

If you don’t get satisfied by the solution than take look at Microsoft post might it helps you in resolving Error 0x8004010F: http://support.microsoft.com/kb/2659085

And if this was too does not work for you than move for third party utility as it not only fixes your Outlook error but also recover the database corrupted by it. If you want to know about it than visit: http://www.pstrecover.org/

Outlook Error 80040834

If your file size is around 2GB in size and you are having trouble in opening an Outlook PST file then most probably you are hitting old legacy limit.

As Outlook older version had set this limit due to constraints based around FAT file system used at a time. It seen that some Outlook related tool still have this limit. Know the point is that due to such limitation it appears that Outlook PST file is unable to open as it get corrupted.

The question: Is at that instant you can use scanpst.exe (inbox repair tool) to repair it? The answer: was no as it seen that the PST file around 25 MB is over the handling limit of scanpst.exe. The last error in log file to signify this is “80040834″

Now for resolving this problem or compacting the PST file size MS have released a tool which makes size of PST file compatible with scanpst.exe the only drawback of this tool is that it basically deletes 25MB of mailbox to shrink its size.

Yes scanpst.exe from Microsoft can’t read mailbox created by Outlook without deliberately deleting the valuable data. So just make sure if you are generate .pst the size should be under 2GB.

There is one utility available in online market by the name of Outlook PST Recovery that helps you in recovering Outlook PST file getting an error 80040834 without deleting a single bit of data or distracting the original structure of file. It is one of the most effective utility as it deeply scan your Outlook database and recover corrupt ANSI as well as Unicode PST file into an healthy one. And saved it into multiple file format like PST, EML and MSG. It also provides you an option to split PST in smaller one, as it is integrated with advance algorithm and high technology you can get many more features in it that gives you an more effective result to know more about it follow the link: http://www.recoveroutlookemails.com/

Error 0x80040154

Microsoft Outlook is apparently one of most demandable email client. With an Outlook express in computer, as you can manage your emails from a single place through it. As you can retain accumulating data in your windows operating system machine, it is possible that an error build up and when you run Outlook you get an error code 0x80040154, this error mainly cause due to problem in Outlook express setup and configuration.

Cause:

The only reason for error 0x80040154 is corrupted PST files in Outlook Express program. This error lets you start your Microsoft Outlook and check your emails. When you try to receive or send a mail, you may get 0x80040154 error code. Sometimes, error code is accompanied by message unknown error. And if the error is unknown you can do nothing about it.

Try following Steps to Fix Error 0x80040154

• Open Control Panel
• Go to Administrative tools and Click on it
• After that double click on Services
• Then locate Windows Defender and double Click on it
• Click "START" know and you will find screen "shake" a little bit as soon as it's started)

If it does not work than no need to get panic about it as resolution of this error is available in market by the name of Outlook PST Recovery software. It works outstandingly in fixing all the Outlook errors and recovering Outlook PST files in a desired manner. for more info visit:
http://storify.com/paulhogan/outlook-recovery-software

Fix Outlook Errors

Some common solution for resolving Outlook error

Disable virus scanner integration.

Sometime a virus Scanner Integration can also cause problem in sending/receiving emails. For instant following time out issues are often a result of this:

• Operation timed out waiting for a response from receiving (POP) server
• Time out occurred while communicating with server

Other issues that often caused by having virus scanner integrated with Outlook are:

• Outlook being slow in collecting mails
• Message ending up stuck in Outlook
• Message being sent but not received
• Receiving or sending blank messages
• General message corruption

Disabling virus scanner integration with Outlook not compromise security of your database as you still sufficiently protected by on-scanner part of virus scanner.

Check your firewall setting

Firewall can block outgoing and incoming traffic so make sure that Outlook or required port for email listed an exception to go through.
If receive/send errors occur after updating your Outlook, than probably you need to reconfigure firewall to re-allow Outlook to pass through again. This is because various firewall solutions verify via hash that it is indeed correct outlook.exe that is trying to pass through firewall and not some virus named itself outlook.exe. Since outlook.exe gets updated with some updates as well, you will need to accept it as safe again. For more info try the manual of firewall solution.

Issues with add-ins

Integrating new add-ins with Outlook can also cause problem in sending and receiving process. To further troubleshoot such add-in manually disables each of them and re- enable each of them one by one to find problematic one.

Check email account setting

If after configuring an account you get a receive/send error, then you should start with verifying your account setting is correct or not, you get this detail from email administrator or ISP.
When you try to send message from another network than network were mailbox is located is need to be enable authentication for configured SMTP server as well.
If Outlook suddenly start showing an receive/send errors, than still it’s a good practice to recheck or verify your account setting and make sure that they are current.
Trying account setting of yours on another computer or creating an additional mail profile for testing could help in determining if it is an issue with current setting of configured account.

Check data store integrity

If there are problem with deliver location then this could conclude in receive/send issues. You can check the integrity of delivery location with the help of scanpst.exe. In some claim you need to run pst2gb tool when data store is full.

Stuck message or hidden read receipt

Stuck message also cause problem in receiving and sending mails. While it is simple to spot stuck message in Outlook, in some cases stuck message can be read receipt which are hidden messages and much harder to recognize the issue and too delete.

And if after following all the above methods the Outlook Error don’t get fix and database get corrupted than switch to a effective solution like Outlook PST Recovery

Error 0x800CCC78

Error 0x800CCC78 when sending 

An error occurs if you are using (Entourage and Outlook Express etc) and do not have setup of SMTP authentication. SMTP is an additional authentication option setup on mail client that helps prevent other ISP member from sending Spam to our as well as other customers.

Know how to enable SMTP authentication

•  Open Outlook
• From tool menu select account setting.
• Verify the selected the email tab.
• Click on account to highlight it, and then click on above change icon. Internet mail setting appear
• Click more setting button on right hand lower corner. Internet mail setting box appears.
•  Click on Outgoing server tab
• Click check box My outgoing server (SMTP) requires authentication and verify that circle box using same setting as incoming mail server is selected.
• To close Internet email setting box click on OK button
• Do not use Test account setting to test the setting as it will fail.
• Click finish button to close Internet mail setting box and Click close button to close account setting box. SMTP authentication has now been enabled.

Error 0x800CCC78 has also been caused due to wrong email address so verify the address entered in form field is correct or not. Make sure that there will be no leading and ending space in your address. Verify sending authentication is correct on outgoing server tab of more setting dialog box.

If still same error 0x800CCC78 flash on your screen and corrupt your important database of Outlook than move for an third party utility name as SysTools Outlook Recovery at it will helps you in a most perfect manner in fixing all types of Outlook error and recovering PST files in a fast and secure manner. To know more about an utility visit: http://www.recoveroutlookemails.com/

Are you getting an Outlook 0x800CCC90 – POP3_RESPONSE_ERROR?

Are you getting an Outlook 0x800CCC90 – POP3_RESPONSE_ERROR? Then due to problem in the connectivity of Outlook and server a following error message on your screen popup.

There was a complication logging onto your mail server. password was rejected. Server: ‘pophost . yourdomainname .com’, Account: ‘pophost .yourdomainname .com’, Protocol: PO3, Port: 110, Server Response: ‘-ERR invalid password or user’, Secure (SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92″

Some helpful ways to resolve this Outlook 0x800CCC90 – POP3_RESPONSE_ERROR try them:

This error occurs when Outlook is incapable to compose authentic connection with mail server using given password and id. Misconfigured setting of Outlook can also cause error 0x800CCC90. Outlook data file damage or corruption is also a big reason behind this error.

Way to fix Outlook 0x800CCC90 error

For resolving this error you have to check and fix the multiple bug area in Outlook. Some common fixing techniques and bug areas are given. Check all of them and fix it if found an error.

• First check the setting of Outlook express and make sure that SMTP and POP3 server are correct. Check password and username. If all detail are correct then by following procedure test your connection.
  • By typing cmd in run open command prompt 
  • Now hit enter by typing following command telnet pop .yourdomainname .com 110 Now you are connected to mail server 
  • Type user with your mail id as follow: USER admin @ yourdomainname .com 
  • After entering type user mail id hit enter you get an message +OK 
  • Now equip password as follow:Pass your password 
  • Hit enter if password and user name is correct you get an ok well done message.
• If by following above process you get connected it means there is no problem with your Outlook and Outlook express. But if fails to connect then it means your password get corrupted just change it and retry to connect with your mail server.
• There may Outlook file data damaged it’s a core file of Outlook and if it get damaged then Outlook is unable to perform any task like making connection or anything else.

The best to resolve error 0x800CCC90 is create new Outlook pst file and import data in it. After that make it default profile and connect with it. You can perform this entire task with the help of a third party utility name as Outlook Recovery Software. It recover all the corrupt items of PST file like emails, contacts, calendars, notes and journals etc in a most precise manner. Get more Info about an utility from: http://www.pstrecovery.us/